Home Care

Complete Line of temporary protective Peeliable Coating to provide temporary masking, protection, decoration or long term preservation. Which is available in Solvent & Water based in liquid form. Applied as a liquid by spray, roller or brush, these coatings dry to form a skin-tight plastic film which can simply be peeled away when required, without damage to surface.We are affianced in presenting to the industry a top class range of Peelable Coatings. We offer them at reasonable rates.

Features:

• Precise composition

• No impurity

• Effective

• Safe to use

Specification:

Use:

Pellable Coating which will form a skin tight protective film (Water Resistant). It can be easily peeled off when desired. It can be used as a Maskant

Color:

It is supplied in Green and Blue colour. It can be supplied in transparent form also and any colour can be given on request


Health and Safety:

Protect your skin and eyes while application use plenty of water in case of irritation eyes plenty of eater in case of irritation to eyes and skin and consult to doctor immediately


Application:

Peelable Coating is a Sprayable and Brushable Grade SHAKE WELL BEFORE USE. Do not add any diluents / Spray gun should not contain residues of Oil Lacquer and Grease. Clean thoroughly with thinner. Spray the material with a pressure of 70 - 120 psi on the surface in a uniform coating. It can be recoated 2 or 3 times in the wet conditions to obtain a thicker dry coating. Allow coating to dry in a stream of hot/cold air. Sunlight or hot air can be used in enhancing the drying process.

Drying Time:

Approx drying time is 45 to 60 mins depending on thickness of coating and ambient temp. Cured Film can be peeled off after 12 to 24 hrs depending on external ambient temp

Repair:

If the dry film is ripped then it can be lifted and resealed by application of a fresh wet coat to the patch. It will rejoin and bond into the original film by itself

Removal:

Easily stripped away by hand when required. We do no recommend removing in freezing conditions as the coating will be brittle

Coverage:

1 kg of material will approx cover 100 - 250 sq ft of area at a dry film thickness of 50 to 100 microns. We recommend a minimum 120 microns DFT for easy film removal