Home Care

We are a renowned organization, engaged in offering a wide range of Epoxy Flooring Services to our esteemed clients.

Protecto-Ezefil 400/500 crack/joint filling compound is a solvent free two component polyurethane reactive system. This material sets to give a highly elastic, non - cracking mass which can be used very effectively to fill and seal joints and cracks in all types of constructions.

USES:Protecto-Ezefil can be used to fill expansion joints, cracks & joints in high traffic floors, bathrooms, cement/metal roofing sheets, slabs, external walls and frames of doors & windows.

APPLICATION: Small cracks should be opened and cleaned of any dirt and loose particles. A base adhesion coat of Wallgard 10 is applied on all sides of the cracks and allowed to dry for 15 minutes. Protecto-Ezefil 400 and 500 are mixed together in the ratio of 3:2 by weight. For horizontal cracks and joints this mixture is poured directly into the cracks. For vertical cracks, up to two parts of white cement should be mixed thoroughly with 1 part of Protecto-Ezefil 400 and 500 mixture and the resulting mixture is then used to fill the cracks by means of a spatula or putty knife. A coat of Ezecoat 500 & 600 is applied over the Protecto-Ezefil to make it resistant to U.V. rays.

ADINO MS CRISTAL 901 is a crystal clear, fast curing, flexible, adhesive mastic bassed on MS-Polymer used for the bonding and sealing in the building and engneering industries, where a transparent color is needed.
New generation, one-component professional hybrid adhesive-sealant based on siliconizedpolyether that cures in contact with humidity.

APPLICATIONS:

• Bonding skirting-boards, panels, plates made of synthetic materials, glaze, terracotta, elementsmade of synthetic materials, wood, metals, metal plates, for all types of surfaces in building such as brick, concrete, gypsum, plasters

•  filling gaps, joints, slots in concrete, wood, gypsum, masonry and other building materials
• sealing and connecting building and construction elements made of glass, steel, PVC andporous materials

• Ultra-transparent, crystal joint,
• free of isocyanates, silicones and solvents,
• good adhesion to humid surfaces,
• excellent adhesion to wide range of construction substrates,
• adheres without primer to most of construction materials,
• can be painted,
• neutral, odourless, non-corrosive to metals and applicable on alkaline surfaces,
• excellent sealing and bonding properties,
• for both exterior and interior applications,
• excellent chemical resistance,
• low shrinkage.

With the support of professionals, we are offering Concrete Densification Process Services. Offered array of concrete densification process service is contributed by the expert to give accurate results. Apart from this, offered concrete densification process service are given as per the customer's need. It is a process by which the surface of the concrete is ground and polished using a penetrating hardener to yield a surface that exhibits reflectivity and increased abrasion resistance. It makes the surface to shine like crazy, which is also long lasting and sort of permanent. All one have to do is wash it with water to maintain it.
Instead of coating the surface with organic solids, densifiers (Sodium/Potasium/Lithium Silicates) react with the concrete itself. This reaction fills in the natural pores and voids in the concrete and provides a dense, hard surface that is easy to clean. The concrete is densified internally and inorganically. There is nothing to wear off the surface, nor is there anything to replace. The same reaction also makes the surface much harder and resistant to abrasion. In addition, the floor surface is rendered free of dust.